PCIe to M.2 NVME SSD Expansion Board Raspberry Pi 5 High Speed Gen 2 3 M. 2

•  Product color is random
•  Not include NVMe SSD.

【PCIe Interface】

•  The Raspberry Pi 5 supports PCIe x1, and is compatible with Gen2 and Gen3 modes.

【M.2 M-key Interface, Supports NVMe Solid State Drives】

•  Supports 2280/2242/2230 size SSDs

【SSD Boot System】

• Supports booting from an NVMe SSD and storage expansion
• The SSD can also be used solely for storage expansion, with the system booting from a TF card

【M.2 Power System】

• The expansion board's power circuit is designed with a 2A current, limited by the Raspberry Pi 5's PCIe interface current limit (5V1A), capable of providing more than 3.3V1.5A output to the solid state drive.
• Typically, the rated current of solid state drives may be 2.5A, 2.7A, or even 3A, but these currents correspond to the limit of X4 mode, Since the Raspberry Pi 5 only supports X1 mode, the actual current used is much less than the rated current, and our design meets the needs of most hard drives.

【Dual LED Indicators】

•  Board-mounted power indicator (“PWR”) and M.2 SSD activity indicator (“ACT”)

【High-Quality Components】

• Utilizes high-quality electronic components and immersion gold process, lead-free production
• Four M2.5 fixed holes, with a recessed design above the board for easy operation of the 40Pin GPIO